Pool Gate Adjustment Instructions

If your gate is not closing correctly, adjust latch and hinges.

Latch & Hinge Adjustment Instructional Video

If your gate is not closing correctly, adjust latch and hinges. Watch the instructional video below.

Play Video
Magnalatch_Navy
Frequently asked Questions

All your Temporary Pool Fence Questions Answered

We only hire temporary pool fencing. These are made from mill aluminium welded to create a superior strong and lightweight fence panel. The fence panels are manufactured to meet and exceed AS1926.1 2012 (Australian Standard for pool fencing).

Temporary pool fencing is not like the mesh fencing that you see on industrial work sites. Mesh fencing is not pool compliant.

We also rent temporary pool gates – stylish aluminum gates, set up with adjustable magna latch and adjustable tension hinges.

Our range includes Temporary pool fencing; temporary pool gates; Steel feet (stands); Clamps; CPR (Resuscitation Signs) and Site Danger signs for new pool constructions.

Yes – the fence panels meet and exceed the requirements of AS1926.1 2012 (Australian Standard for pool fencing).

All gates are self-closing and fitted with a magna latch (Magnetic Latch). The latches have a lockable key assemble for extra security and peace of mind.

All our equipment is made in Australia – unlike competitors who use cheap quality equipment made in China.

Also – all our installers are fully trained and competent in installing a compliant pool fence

We hire across South East Queensland – from the Gold Coast, through Brisbane, up to the Sunshine Coast, and West to Ipswich

At Temporary Pool Fence Hire, we offer a professional service at competitive rates. We have high quality products that are right for the job. All our staff are fully trained on the correct installation and are friendly too!

Yes – you can install temporary pool fencing around an above ground pool, but you must also have a temporary pool gate as well.

Please note though – there are different rules and requirements for using temporary pool fences if your above ground pool is only a temporary installation. We recommend that you contact your local council officer – as the requirements change between LGA (Local Government Area).

In all instances though, you should always have compliant temporary pool fence available on site before water is put into a swimming pool.

A concrete pool may take many months to cure. As soon as the concrete has been poured, the pool is capable of holding 300mm of water – Queensland laws require a compliant temporary pool fence around the pool.

The temporary pool fence is signed off by a building certifier (not a pool inspector). Most building certifiers now request a pool gate is installed as well – with the logic that it means trade and services companies will not remove the pool fence panels, as there is an access point.

Council officers have the right to enter your property at any time, and if a complaint has been made about your fence – then they have to attend and undertake a preliminary inspection.

They may request you to take immediate action to make your existing pool safe – and this may include the instruction of installing temporary pool fence within 24hrs.

First, ensure there are no damaged power cables in the areas – if there are – cordon off the area, and contact the relevant authorities. As a pool owner, you are responsible for maintaining a compliant pool fence at all times – even if it has been storm damaged. We work with a number of insurance companies across SE Queensland – and can make emergency out of hours deliveries and installations for you. You will need to provide all your contact details, and the amount of fencing that is required. We will invoice you directly – which you can then supply to your insurance company. If there are damaged trees still in the area, or damaged buildings – we may supply additional fence and cordon off a larger area than the original fence.

Premium Pool Fence Panels: Australian-Made for Superior Safety and Flexibility!

Discover the best in Australian-made, lightweight aluminum fence panels. Our temporary fencing and gates meet AS1926.1 2012 Australian Standard for pool fencing, ensuring durability and easy upkeep. Perfect for pool builds, renovations, landscaping, or storm repair, our 1200mm x 2.5m panels offer versatility with no hire period restrictions. Same-day delivery available, DIY or professional installation options.
FAQS

Your Pool's Best Choice: Safety and Quality Guaranteed!

Top-quality Australian-made fence panels meet AS1926.1 2012 Standard. Versatile and durable for pool builds or renovations. Same-day delivery available.
FAQS

The hire starts on the day of delivery/installation.

The hire ends on the day you have been quoted.

Generally, most rentals are for an initial month hire – and are extended as required.

If you wish to extend the hire, you need to advise us 5 business days before the end date.

We require 5 business day notice of end of hire.

If you no longer require the fence whilst in your first initial hire period (and want to return it early), there are no part credits or refunds.

Once you have accepted the quote, you will be emailed the invoice for the initial hire period. The email has a link where you can pay for the rental online – using a debit or credit card (standard merchant fees apply) – or you can pay directly via bank deposit. If you want to extend the rental – then a new invoice is sent for the extended rental period.
If you wish to access trade terms, then you will need to contact us and request a trade account form. This is for glaziers; pool inspectors; landscapers, builders etc. We cannot provide trade terms without this form being pre-completed.
For most installations, we allow at least a metre on either side of the pool. For example – if you have a 7m x 4m pool – on 2 of the sides you will need 9m (7m pool + 1m + 1m), and for the width you will need 6m (4m pool + 1m + 1m). So, the total will be 30 linear metre (9 + 9 + 6 + 6).
The equipment is always the responsibility of the hirer whilst it is in your possession. If the equipment is stolen, please advise us as soon as possible. We will provide an invoice for the cost of the equipment that is stolen, allowing you to make a claim on your insurance company. In addition, the equipment rental charges will continue until we have received cleared payment for the loss of the equipment.
The equipment is always the responsibility of the hirer whilst it is in your possession. If the equipment is damaged, please advise us as soon as possible. We will ask for a brief description and maybe photos. We will then make a brief assessment of the repairs/replacement costs. This will allow you to follow up with any parties that may have damaged the equipment.
All our goods are photographed on leaving the depot and on installation. If on collection, there are damaged or lost goods – then fees will apply. As we have our own workshop, we try and keep the fee as low as possible for repairs of broken panels or gates.

Wherever possible we aim to keep all costs inclusive so you don’t incur additional charges, however, there are some circumstances where additional charges come into effect.

These include:

Labour Costs

The temporary pool fence hire includes one (1) delivery and one (1) pick up. If a request is made to come and move the fence, add additional fence panels, partially remove fence panels etc then a labour charge will apply.

If TPFH attends your site and is unable to install or collect the temporary fencing and components on the day requested by the customer, for any reason outside of TPFH control, then labour charges will apply.

Damaged or lost equipment

TPFH thoroughly inspects all our products before leaving our depot and again upon collection. If any part is damaged, unable to be repaired, missing or stolen, replacement costs will be incurred.

Replacement costs for common products deemed unfit for repair, missing or stolen will be as follows;

  • Pool Gate: $900 + GST
  • Pool Fence: $200 + GST
  • Clamps: $8 + GST
  • Feet: $50 + GST
Full terms and conditions are supplied with invoice.

Choose Temporary Pool Fence Hire for safety, compliance, and convenience. Our pool fences meet regulations, offer fast delivery, and flexible hire.

Our Process

The Simple Steps to Temporary Pool Fence Hire

Request a Quote

Request a quote and kickstart your pool safety journey with ease. Our team is ready to assist you!

Our Team Arrive

Our dedicated team promptly arrives to efficiently install your temporary pool fence, ensuring a hassle-free setup process.

Solve Your Pool Safety Needs

Enjoy the flexibility of choosing the ideal hire period that suits your needs, whether it's short-term or long-term.

Our Work

Gallery

Exceeds AS1926.1 2012 Standards

Our temporary pool fence panels surpass AS1926.1 2012 Standards, ensuring top-tier safety and compliance for your peace of mind.

Premium quality

Experience unparalleled premium Australian-made quality with our top-notch pool panels, crafted to perfection for ultimate performance.

Lightweight & robust

Our temporary pool fence panels are both lightweight and robust, offering ease of handling without compromising on strength and durability.

Premium Temporary Pool Fence

Experience excellence with our premium pool panels. Compliant with AS1926.1 2012 Australian Standard, lightweight yet robust. Same-day delivery available. Choose quality for your pool project!

Expert team

Our expert team ensures a smooth installation process, providing professional guidance and support throughout your pool project.

Hassle-free experience

Enjoy a hassle-free experience with our efficient service, quick setup, and flexible options for your temporary pool fence needs.

Flexible & reliable

Count on our temporary pool fence panels for flexible, reliable solutions. Easily adjustable, they meet your pool project needs with confidence.

Top-quality Australian-made fence panels meet AS1926.1 2012 Standard. Versatile and durable for pool builds or renovations. Same-day delivery available.

Our Services

Welcome to Safe Pool Solutions, your go-to source for specialised rental equipment designed to meet the needs of both residential and commercial construction in the pool industry. Our client base spans pool owners, pool builders, house builders, and developers. At Safe Pool Solutions, we take pride in providing customized rental services that cater to the unique requirements of our clients within the pool industry.

Our comprehensive range of rental services, features Pool Void Covers®, council-compliant temporary pool fences and gates, industrial mesh fences, and highly efficient dewatering pumps. Whether you’re seeking to bolster safety measures around your pool area during construction, oversee construction projects, or address specific pool-related necessities, Safe Pool Solutions stands as your dependable partner. 

Discover the convenience of top-quality Australian-made rental equipment, meticulously crafted to enhance your pool experience and address the evolving demands of the dynamic pool industry.

Pool Void Covers®

Our Pool Void Covers® system are scaffold rated and specifically engineer-designed to comply with Australian regulations. Used on existing or new sleeper pools.

1.2m Pool Fence & Gate

Our 1.2m temporary pool fencing and gates meet AS1926.1 2012 Australian Standard for pool fencing, ensuring compliance, durability and easy upkeep.

Industrial Mesh Fence

Our industrial mesh fence is constructed from high quality galvanized steel, ensuring durability and compliance with Australia's high standards of quality.

Request a Quote

Let us know about your residential project and we’ll tailor a solution for you.

Please enable JavaScript in your browser to complete this form.
en_AU